Knowledge Base
AVM Content
Knowledge document #438
FRITZ!Smart Gateway
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 6890 LTE
- FRITZ!Box 6860 5G
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6820 LTE
- FRITZ!Box 6690 Cable
- FRITZ!Box 6670 Cable
- FRITZ!Box 6660 Cable
- FRITZ!Box 6591 Cable
- FRITZ!Box 6590 Cable
- FRITZ!Box 6490 Cable
- FRITZ!Box 6430 Cable
- FRITZ!Box 5690 Pro
- FRITZ!Box 5690
FRITZ!Smart Gateway cannot establish a Wi-Fi connection
After you set up the FRITZ!Smart Gateway, it cannot establish a Wi-Fi connection to the FRITZ!Box and the Connect LED on the FRITZ!Smart Gateway flashes orange.
Work through the following steps to resolve the problem.
1 Installing the latest FRITZ!OS for the FRITZ!Box
- Install the latest FRITZ!OS on the FRITZ!Box.
2 Optimizing the FRITZ!Box's Wi-Fi settings
Enabling the 2.4-GHz Wi-Fi network
The FRITZ!Smart Gateway only supports Wi-Fi connections in the 2.4-GHz frequency band. Enable the 2.4-GHz Wi-Fi network in the FRITZ!Box so that the FRITZ!Smart Gateway can establish a connection to the FRITZ!Box:
- Click on 'Wi-Fi' in the FRITZ!Box user interface.
- Click on 'Wi-Fi Channel' or 'Wi-Fi Network' in the 'Wi-Fi' menu.
- Enable the option 'Set Wi-Fi channel settings automatically (recommended)' and enable the Wi-Fi network for the 2.4 GHz frequency band or enable the 2.4 frequency band in the section 'Active Frequency Bands'.
- Click on 'Apply' to save the settings.
Disabling the MAC address filter
- Click on 'Wi-Fi' in the FRITZ!Box user interface.
- Click on 'Security' or 'Radio Network' in the 'Wi-Fi' menu.
- If available, click on 'Restrict Access to Wi-Fi'.
- Enable the option 'Allow all new wireless devices'. If the option is not displayed, enable the Advanced View first.
- Click on 'Apply' to save the settings.
Enabling the WPS function
- Click on 'Wi-Fi' in the FRITZ!Box user interface.
- Click on 'Security' in the 'Wi-Fi' menu.
- Click on the 'WPS Quick Connection' tab.
- Enable the option 'Push-button method enabled' or 'WPS enabled'.
- Click on 'Apply' or 'Start WPS' to save the settings.
Unlocking the buttons
- Click on 'System' in the FRITZ!Box user interface.
- Click on 'Buttons and LEDs' in the 'System' menu.
- Click on the 'Keylock' tab.
- Disable the 'Buttons locked' checkbox.