Recommend:
Knowledge Base document #3708

Creating a template and scene for smart home devices

Switching templates with the FRITZ!Box user interface

You can save the individual settings of your smart plugs, for example FRITZ!DECT 200, in different templates. You can switch individual smart plugs or groups. Simply select the appropriate template as required and click to enable the desired settings. You can enable the template with the user interface of your FRITZ!Box, a FRITZ!DECT smart switch, with FRITZ!Fon, and with FRITZ!App Smart Home. If you are using a FRITZ!Box with FRITZ!OS 7.50 or later, you can also combine several templates into a scene and use a routine to switch them automatically.

For example, if you work shifts, you can save different switching profiles in corresponding templates for the early and the late shift and then quickly switch between these templates at any time.

Requirements

  • FRITZ!OS 7.50 or later must be installed on the FRITZ!Box to create a scene.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Creating and using a template

Creating a template  

  1. Click 'Smart Home' in the FRITZ!Box user interface.
  2. Click 'Automation' or 'Groups and Templates' in the 'Smart Home' menu.
  3. Click 'Creating a Scene or Template' or 'Create Template'.
  4. Configure the desired settings and select the devices, the switching type, and the name of the new template.

    Note:If a device is already in a group, you cannot assign just that device to a template; you can only assign the entire group to a template.

  5. Now save the template.

Applying a template  

Important:When a template is applied, the current settings of the smart home devices and groups included in the template are overwritten.

  1. Click 'Smart Home' in the FRITZ!Box user interface.
  2. Click 'Operation' in the 'Smart Home' menu.
  3. Click 'Apply' for the desired template.

Note:You can also enable the template with a FRITZ!DECT smart switch, a FRITZ!Fon (menu 'Home Network > Smart Home'), or in the home network and over the internet with FRITZ!App Smart Home.
You can combine several templates into a scene and/or use a routine to switch them automatically.

2 Creating and using a scene

There are different types of scenes that you can use. With custom scenes, you use templates you created yourself; with predefined scenes, you use automatically generated templates:

Creating a custom scene

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Automation" in the "Smart Home" menu.
  3. Click "Create Scene or Template".
  4. Enable "Predefined or custom scene" and click "Next".
  5. Enable "Own Scene" and click "Next".
  6. Enter a name for the scene and click "Next".
  7. Select the templates you want to combine in the scene and click "Finished". Now the scene is created.

Adjusting a predefined scene

There are two preset scenes, "Coming Home" and "Leaving the House", from automatically generated templates that you can use directly. These preset scenes switch all of the LED lights and smart plugs registered with the FRITZ!Box, Wi-Fi and the Wi-Fi guest network, and the FRITZ!Box answering machine on or off, and set the radiator controls to the comfort or cool-down temperature.

If you would like to adjust a predefined scene, proceed as follows:

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Automation" in the "Smart Home" menu.
  3. Click (edit) next to the "Leaving the House" or "Coming Home" scene.
  4. Enable all of the actions to be included in the scene. Disable the actions which should not be included in the scene.
  5. Click "Apply" to save the settings.

Applying a scene

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Operation" in the "Smart Home" menu.
  3. Click "Applying" for the desired scene.

Note:There are several ways to apply the scene in the home network and from anywhere over the internet.



Related topics:

Language selection