Recommend:

Knowledge Base

AVM Content

Knowledge document #1587

FRITZ!Box 7581

This support document is available for the following products:

Files cannot be copied to FRITZ!NAS

The FRITZ!NAS user interface (http://fritz.nas) cannot be used to copy files to a USB storage device connected to the FRITZ!Box although there is enough space on the storage device. The web browser (for example Firefox, Chrome, Safari) either does not react when you click the "Add" button in the FRITZ!NAS user interface or copying is terminated immediately after clicking "Add". The following error message may be displayed:

"Copying complete. 1 file was not copied."

1 File or partition size is not supported

The FRITZ!NAS user interface (http://fritz.nas) supports:

Files up to 4 gigabytes,
Partitions of up to 4 terabytes.

The FRITZ!NAS user interface does not support copying files that are larger than 4 gigabytes or copying files to a partition that is 4 terabytes or larger.

Note:Files can be downloaded regardless of the size of the file or partition. The storage capacity of hard drives with partitions larger than 4 terabytes is displayed as "0 byte" in the FRITZ!Box user interface (under "Home Network > USB Devices > Properties" and "Home Network > Storage (NAS)").

Workaround

Connect the USB storage device to a computer.
If you are using a USB storage device with the FAT32 file system, reformat the storage device with a different file system. Use exFAT or NTFS, for example.
If you are using a USB storage device with partitions that are 4 terabytes or larger, reformat the storage device and only create a maximum of four partitions, each no larger than 4 terabytes in size.
ATTENTION!Back up your data before reformatting your USB storage device because all of the data on it will be lost during this process. Refer to the manufacturer for information on the formatting procedure.