Recommend:
To the knowledge base
Knowledge document #3769
FRITZ!Box 5530 Fiber
This support document is available for the following products:

Loading the factory settings of the FRITZ! door/window contact

Load the factory settings to reconnect the FRITZ! door/window contact or to connect it with a different FRITZ!Box or FRITZ!Smart Gateway. This makes sense if you are going to use the door/window contact at a different location or are planning to pass it on to another user, for example.

You can easily load the factory settings of the door/window contact using the pin included with delivery.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the factory settings

Loading the factory settings of the FRITZ! door/window contact
  1. Open the housing of the FRITZ! door/window contact.
  2. Pick up the pin included with delivery.
  3. Carefully insert the pin into the "Reset" opening inside the housing for at least one second. The LED inside the sensor begins to flash and the factory settings are loaded.

2 Deregistering the door/window contact

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Devices and Groups" in the "Smart Home" menu.
  3. Click the "Delete Device" button.
  4. Click the (Delete) button next to the respective device.
  5. Click the "Finished" button.
Language selection